|
| Certifications |
|
|
|
| Testimonials |
|
| We have used George Philip’s Medical Products and are very happy with the performace and the life. We have been in relationship for close to a decade now and we would recomend them.
Lincon Page
Page Medical Inc, Texas |
| More... |
|
PRODUCT RANGE
PHYSIOLOGICAL PRESSURE MONITORING >
Disposable Pressure Transducer
| GENERIC NAME |
BRAND |
USES |
| Disposable Pressure Transducer |
ACCU+ |
Polyethylene |
For accurate measurement of physiological pressure & other important hemodynamic parameters. |
|
|
| FEATURES |
BENEFITS |
| Modern mems chip technology |
 Accurate transmission of pressure waves |
| Transparent housing |
For easy detection of air bubbles and quick priming |
Automatic continuous flow
@
3 cc/hr or 30 cc/hr |
Maintains catheter patency and eliminates the need for intermittent manual flushing.
Facilitates dynamic response testing of the monitoring system, allowing rapid flushing of Pressure Monitoring Line after collection of blood sample. |
| Assembled & individually tested with automated machines. |
High quality, safety and reliability of each unit. |
| Multiple cable end options |
Compatible with most of the commonly used patient monitors. |
|
| MATERIAL SPECIFICATIONS |
Body & end adaptors |
Polycarbonate |
| Polycarbonate |
Silicone |
| Capillary flow system |
Glass |
| Luer Caps |
Polyethylene |
| TECHNICAL SPECIFICATIONS |
Pressure Stability |
5 Bar Hydrostatic |
| Priming Volume |
0.80 ml |
| Continuous flow rate at 300 mm Hg pressure |
3 cc / hr |
| Activated flush rate at 300 mm Hg pressure |
130 ml / min |
| PRODUCT CODE & PACK DETAILS |
GP/HM/03/XXX |
For detailed specifications & product codes, kindly refer table at the end of the catalogue |
|
| Specifications |
Parameter |
Value |
Units |
Notes |
| General |
Pressure Ranges |
– 30 to 300 |
mmHg |
–0.58 psi to 5.8 psi
(-0.03 bar to 0.03 bar) |
| Overpressure |
125 |
psi |
(x bar) minimum |
| Electrical
@ 72°F (22°C) Unless Otherwise Stated |
Input Excitation |
1 to 10 |
VDC |
Calibrated for 6 VDC |
| Dielectric Breakdown |
10,000 |
VDC |
5 |
| Risk Current |
2 |
µA |
Maximum (per AAMI), 5 |
| Input Impedance |
1800 to 3300 |
Ω |
|
| Output Impedance |
285 to 315 |
Ω |
|
| Environmental |
Temperature |
Compensated |
59° to 104° |
°F |
(15°C to 40°C) |
| Operating Storage |
59°F to 104°F |
°F |
(15°C to 40°C) |
| –13° to 158° |
°F |
(–25°C to 70°C) |
| Humidity |
10 to 90 |
% |
|
| Light Sensitivity |
1 |
mmHg |
maximum (per AMMI BP22) |
| Operating Product Life |
168 |
hours |
|
| Shelf Life |
3 |
years |
|
| Mechanical |
Weight |
< 0.0044 |
lb |
(<2 g) |
| Volume Displacement |
< 0.0008 |
in |
(<0.02 mm3) |
| Media Interface |
Medical grade, dielectric gel |
| Gel Tube Interface Material |
Polycarbonate |
|
| Performance Parameters * |
Units |
Minimum |
Type |
Maximum |
Notes |
| Offset |
mmHg |
– 25 |
0 |
25 |
|
| Sensitivity |
V / V / mmHg |
4.95 |
5 |
5.05 |
|
| Calibration |
mmHg |
97.50 |
100 |
102.50 |
2 |
| Symmetry |
% |
— |
— |
± 5 |
|
| Linearity(–30 to 100 mmHg) |
mmHg |
— |
— |
1 |
6 |
| Linearity (100 to 200 mmHg) |
% output |
— |
— |
1 |
6 |
| Linearity (200 to 300 mmHg) |
% output |
— |
— |
1.50 |
6 |
| Thermal Coefficient Offset |
mmHg / °C |
— |
— |
± 0.30 |
3 |
| Thermal Coefficient Span |
% / °C |
— |
— |
± 0.10 |
3 |
| Frequency Response |
Hz |
1200 |
— |
— |
5 |
| Phase Shift |
degrees |
— |
— |
5 |
5 |
| Offset Drift |
mmHg/8hrs |
— |
— |
1 |
4.50 |
|
 Download PDF |
|
| |
|
|
